Contactless RFID cards
Contactless RFID keyfobs
Connection to elevator
Preview of main user interface of "DACC-1 USB Administrator" Software"
|
Controller for access control of elevators in residential and administrative buildings - "DACC-1 USB"
"DACC-1 USB" is controller for restricting of access to elevators in residential and administrative buildings.
Identification is performed with contactless RFID chip-cards and keyfobs. The controller allows adding of:
- 999 work cards – for residents/workers in the building
- 50 service cards – for service personnel (eg. personnel of communal services)
- 16 system cards – for access to system functions without the need of PC
Controller outputs for elevator:
- Normally closed relay for panel with elevator buttons.
- Integrated impulse power supply from 18 to 72V, with galvanic isolation.
- Integrated linear power supply from 7.5 to 18V.
The controller activates the elevator buttons only after a valid card is put in front of the reader. Each card has a counter, which allows individual monitoring of elevator usage.
The controller allows adding, blocking and unblocking of cards from PC (with USB interface), as well as without a PC, by using a system card and a programming button. Blocking/unblocking of single cards is supported.
When working without a PC, the controller gives directions to the user with voice messages.
No need for additional devices for configuration.
PC software is compatible with Windows XP/Vista/7 and has convenient graphical user interface for changing of controller configuration and managing the list of cards.
- Works with contactless RFID cards and transponders (125 kHz).
- Memory for 999 work cards.
- Memory for 50 service cards.
- Memory for 16 system cards with different access rights.
- Changing of configuration, adding, blocking and unblocking of cards with PC software for Windows.
- Adding, blocking, unblocking of work cards, and activation of "Free access" mode without a PC, only with a system card and a programming button.
- Counter for usage of each card.
- Programming of work, service and system cards
- Managing of lists with cards
- Setting of unique ID and password required for PC access.
- Export/Import of configuration and cards into text files.
- Compatible with Windows XP/Vista/7.
- Power supply: linear from 7.5 to 18V or impulse from 18 .. to 72V, with galvanic isolation.
- Power consumption: < 1 W
- Memory capacity:
- 999 work cards
- 50 service cards
- 16 system cards
- Outputs:
- 1 pc. relay with one NO and one NC contact
- 1 pc. for LED
- 1 pc. for speaker
- Impedance of speaker output: 8 Ω
- Maximum speaker power: 0,25 W
- Inputs:
- 1 pc. for reader coil
- 1 pc. for programming button
- Supported RFID cards: 125 kHz.
- Card reading distance: 10 cm.
- PC interface: USB 2.0
- Working temperature: -10 .. +40 oC
- Maximum relay current: 5 À
- Maximum voltage at relay contacts: 230 VAC
- Dimensions: 125 x 85 x 28 mm.
12 months
|
